• Gripset GC Pro is a unique, single-component waterproof bedding compound for use with the Gripset GC sheet membrane suite. Incorporating the latest fast-drying technology, GC Pro displays outstanding primer-less adhesion over various substrates including concrete, masonry screed and fibre cement sheeting.
    1. Water-based, free of solvents, non-toxic and non-flammable
    2. Waterproof Primer-less adhesion
    3. Fast drying
    4. Suitable for internal and external use
    5. Can be applied over damp surfaces
    6. Excellent workability and easy to apply
    7. Roller or trowel applied
    Substrates
    • Concrete
    • Render, screeds and general masonry surfaces
    • Concrete blocks and clay brick
    • CFC, cement sheet, Hardies Scyon™, plaster board surfaces
    • Particleboard flooring (Structaflor etc)
    • Plasters and general mineral surfaces
    • Aerated concrete panels and blocks
    • Metals
    Coverage

    A minimum 0.8mm wet bed of GC Pro Adhesive is to be formed for bonding the GC sheet membrane suite.

    General consumption is approximately 1.2m² per litre applied with a 2.4mm V notch trowel or medium nap roller.

    Adhesive coverage is dependent upon surface condition and will vary accordingly as uneven surfaces will require greater coverage to achieve the required bed thickness

    1 x 15Litre pail of Gripset GC Pro Adhesive will cover approx. 18m² of area to adhere the GC sheet suite to the surface.

    Colour
    Blue
    Packaging 15kg pail
  • Gripset GC All Purpose Adhesive is a high performance, single part waterproof bedding compound used for fixing any of the GC sheet membranes. Based on silane modified polymer technology, GC All Purpose adhesive possesses outstanding adhesion and high early grab properties over a broad range of porous and non porous substrates. Designed to fix all the Gripset GC Sheet membranes for internal and external applications, providing a low viscosity, easily spreading adhesive with smooth consistent properties that can be applied to dry and damp surfaces.
    • Ready to use, no mixing required
    • Easy trowelling properties, with outstanding form/ridge holding
    • Rapid grab and outstanding adhesion properties
    • Waterproof
    • Suitable for porous and non porous surfaces
    • Able to be applied over damp and un-primed surfaces
    • Rain resistant
    • Excellent footfall and sound dampening properties
    • Non hazardous, very low odour for internal applications
    • Can be covered with Gripset trafficable coatings while wet
    Substrates
    • Concrete
    • Render, screeds and general masonry surfaces
    • Concrete blocks and clay brick
    • CFC, cement sheet, plaster board surfaces
    • Particleboard flooring (Structaflor etc)
    • Plasters and general mineral surfaces
    • Aerated concrete panels and blocks
    Coverage When used to fix the GC1 and GC4 sheet systems: 1.2m² per kg using a 2mm notch tooth trowel. When used to fix the GC2 sheet system: 0.8m² per kg using a 3mm notch tooth trowel
    Colour Wet: grey Dry: brown
    Packaging 16kg pails
  • Gripset GC2 is part of an innovative sheet membrane system that provides high performance waterproof and vapour proof membrane with outstanding crack resistantant de-coupling properties. Specifically designed for external wet areas, roofing and specialised remedial applications. Consisting of fibre bonded fabric on the exposed face and heavy duty fibre backing on the rear face, GC2 forms a fast and highly durable waterproof system that allows surface toppings/finishes or Gripset trafficable coatings to be applied over immediately after the membrane system has been installed. A unique feature of the GC2 system is the anti-fracture and decoupling properties to prevent stress cracks from transferring through to the finished surfaces over concrete, masonry and timber substrates. Further details are available in the Gripset GC manual for a range of specifications and fixing details for waterproofing applications where this system can be used.
    • Provides an immediate waterproof finish upon completion, avoids delayed drying times
    • Fast and reliable sealing method. Reduces labour and application time of waterproofing by >50% over sheet and liquid systems
    • Enables the direct application of toppings, tiles, screeds, levellers and liquid membrane same day as waterproofing application

    “It's bullet a proof system and the adhesive is easy to trowel, easy to apply”  - John Geramia, Trim Tech.

    Uses
    • External wet areas, podiums, terraces, and balconies to be tiled over
    • External wet areas to be finished over with pedestal pavers
    • Roofs, suspended external floors and box gutters when used with Gripset UV stable finishes applied over
    • Repair system over failed roof membrane products
    • Roof gardens, earth shelters (* refer fixing specification)
    • Planters and garden beds (* refer fixing specification)
    • Suspended pool floors, spas, water features and fish ponds
    • Decoupling/anti-fracture membrane system prior to tiles on concrete and timber flooring substrates
    Substrates
    • Concrete
    • Render, screeds and general masonry surfaces
    • Concrete blocks and clay brick
    • CFC, cement sheet, Hardies Scyon™, plaster board surfaces
    • Particleboard flooring (Structaflor etc)
    • Plasters and general mineral surfaces
    • Aerated concrete panels and blocks
    Coverage GC2 Sheet: 15m x 1m wide roll = 15m2
    Colour Yellow
    Packaging Cardboard box consisting of 1 roll: 15mx1m
  • Gripset BRW-HD is a self-adhesive butyl rubber sheet membrane with a laminated high strength HDPE film facing designed for subterranean waterproofing and multi layered sheet membrane applications. The high tack butyl backing provides a high performance waterproof layer with unrivalled adhesion to porous and non-porous surfaces in a wide range of temperature conditions. BRW-HD membrane has outstanding resistance to vibration, movement and flexing, delivering a waterproofing system that overcomes the limitations of bitumen self tack and heat applied sheet membranes. As a non-bituminous system, termination points at ground level or above earth lines have no risk of bleeding or yellowing into wall surface finishes. The BRW-HD system along with the BRW-PF grade enables the direct adhesion of finishes over the membrane including tiles, renders, textures, paints systems and decorative finishes.
    Uses
    1. Self-adhesive application
    2. Outstanding high bond adhesion over surfaces applied to
    3. Excellent performance in low to high temperatures, -300C to 800C
    Substrates
    1. Primed or dense concrete
    2. Primed concrete block and masonry
    3. Galvanised iron, zincalume, copper, aluminium, and most metallics
    4. Soft and rigid plastics, PVC, DPC films
    Colour HDPE film; butyl backing black
    Packaging 10mx1m roll packed in cardboard box
    The BRW-HD Tape is to be used at sheet ends between rolls, to seal overlapped sections where there is no sealing strip. BRW-HD tape can be used as a general detailing tape for all BRW-HD applications. All general overlapping between sheets or with the BRW-HD Tape should be a minimum of 50mm.
  • A sheet membrane that provides high performance waterproof and vapour barrier protection for numerous applications. The unique properties of the GC1 membrane system enable it to form a fast and highly durable waterproof finish enabling surface finishes such as tiles, screeds and toppings to be applied immediately after the membrane system has been installed.
    • Waterproof layer and vapour barrier
    Uses
    • Internal wet areas, wet floors, showers, laundries
    • Sandwich sealing between existing and new slabs
    • Internal anti-fracture flooring system for tiles over concrete
    • Vapour sealing for wall and floor substrates
    • Sandwich sealing between existing and new concrete toppings
    Substrates
    • Render, screeds and general masonry surfaces
    • Concrete blocks and clay brick
    • CFC, cement sheet, Hardies Scyon™, plaster board surfaces
    • Plasters and general mineral surfaces
    • Aerated concrete panels and blocks
    • Metals
    Coverage GC1 Sheet: 30m x 1m roll = 30m2 GC1 Adhesive: 1 x 20kg bag will cover 15m2
    Colour Blue sheet
    Packaging Cardboard carton, consisting of 1 Roll: 30m x 1m GC1 Adhesive - 20kg bags
  • Gripset BRW-PF is a self-adhesive butyl rubber sheet membrane with a polypropylene fabric facing that supports the application of surface finishes for waterproofing internal and external areas. The high tack butyl backing provides a high-performance waterproof layer with outstanding resistance to vibration, movement and flexing, delivering a waterproofing system that overcomes the limitations of liquid membranes and bitumen tack sheet membranes. Forming an instant waterproof seal when applied onto surfaces, BRW-PF the system avoids downtime for drying or curing, enabling surface finishes and adhesives to be applied directly over. BRW-PF can be finished over with Gripset adhesives, membranes, coatings, screeds, mortars, renders and approved decorative finishes.
    Uses
    1. Excellent performance in low to high temperatures, -300C to 800C
    2. Allows direct fix of surface finishes, tiles with/without screeds
    3. Anti-fracture system
    4. Compatible as a multi-layered system with BRW-HD
    Substrates
    1. Primed or dense concrete
    2. Dincel Structural walls
    3. Galvanised iron, zincalume, copper, aluminium, and most metallic
    4. Soft and rigid plastics, PVC, DPC films
  • Gripset XpressLay is a next-generation high strength reinforced self-adhesive PVC sheet that offers unique properties for waterproofing wet area applications, internal and external. At less than 1mm film thickness, XpressLay provides tensile strength properties of 13MPa offering standalone benefits and advantages for wet area waterproofing. The innovative self-adhesive properties of XpressLay enable the sheet to be applied directly over substrates and removed or re-positioned, without compromising the bond to surfaces or performance of the shear adhesion strength over floor surfaces. One of the primary features of XpressLay is that while providing high-performance waterproofing and vapour barrier properties, the tensile strength properties enable it to perform as a decoupling layer for tile beds, withstanding floor movement strains.
    • Rapid Self Adhesive Application
    • Able to bond and remove without surface adhesion compromise
    • 3 in 1 Waterproof, Anti-Fracture and De-Coupling system
    • XpressLay PVC core provides outstanding resistance to vibration, movement and flexing
    Uses
    • Wet area waterproofing
    • Waterproofing over existing tiles, vinyl or timber flooring
    • Waterproofing surfaces in cold and/or humid environments
    • Anti-fracture system over cracked concrete and floor substrates
    • Enables future removal of tiles without substrate damage
    • Multi-layered high-performance system with Gripset BRW-HD
    • Waterproofing balconies, decks on dense/non-porous surfaces
    • Tiling applications over aged floors or industrial floor coatings
    • Tile underlay on timber flooring or structural sheet surfaces
    Substrates
    • Timber sheeting, including plywood and particleboard
    • Concrete
    • Timber floorboards
    • Screeds, cement based compounds, self-levellers
    • Glazed tiles and porous tiles
    • Compressed Fibre Cement Floor Sheeting
    • Existing vinyl
    • Terrazzo, polished concrete
    • Sealed surfaces
    • General porous or non-porous floors that are structurally sound for tiling

Title

Go to Top