MB Waterproofing Supplies

Gripset 38FC – SBR Fast Cure Membrane
Next generation fast curing, fibre reinforced SBR latex membrane designed for waterproofing internal and external wet areas under tiles, toppings and overlay finishes. Utilising the latest in fast cure technology, Gripset 38 FC provides rapid re-coat and tile over time, making it the ideal choice for domestic and commercial projects with time constraints that require fast turnaround times.

Fast cure technology - tile over in 4 hours

Resistant to permanently wet conditions without re-emulsification

Tough durable finish

Uses

Internal wet areas, bathrooms, laundries and tiled areas

Balconies, decks, podiums, terrace floors and tiled roofs

Retaining walls, planter boxes and underground areas

Substrates

Concrete, render and masonry

Fibre cement sheeting, plasterboard and structural sheeting

Wet area timber sheeting and external grade plywood

Coverage 2 x coats at a total minimum coverage of 1.5 litres/m²

Dry Times Recoat: 1 hour Tiling/toppings over: 4 hours

Colour Blue

Packaging 5 and 15 litre pails
Details
Tile Leveling Systems

Box of 2000 1.5mm

Details
Gripset LS – External Trafficable Coating
Durable hard wearing and nonslip membrane designed for external floor surfaces. Suitable for permanent exposure to varying climatic conditions, UV light and foot traffic. Use LS Roof Coat in conjunction with Gripset 38 as an exposed, trafficable weatherproof membrane system for roofs, podiums and balcony areas.

Durable hard wearing

Nonslip finish

Excellent ponding water resistance

Uses

Roof areas*

Walkways

Deck and balcony areas*

Exposed roof surfaces for maintenance and access areas*

*When used in conjunction with Gripset 38 as the base membrane layer

Substrates

Concrete and masonry screeds fibre cement, compressed fibre cement and cement sheeting products

Exterior grade plywood

Hebel panels

Coverage 2 x coats at total minimum 1 litre/m²

Dry Times Weatherproof: 72 hours

Colour Grey

Packaging 15 litre pails
Details
Gripset 59 – High Build Bitumen
Unique bitumen compound designed for applications where high build finishes are required. Application is by spatula or trowel achieving film builds in excess of 10mm in a singular application. Under compression the waterproofing properties and water vapour transmission properties are further enhanced offering an ideal durable membrane for subterranean applications

Solvent free, non flammable and non toxic

Up to 10mm build in one application

High impact and abrasion resistance

Uses

Waterproofing underground substrates, retaining walls, garden beds

Waterproof patching/filler

Waterproofing large construction joints (non expansion joints), e.g. abutments between concrete panels and precast

Substrates

Concrete, render and masonry.

Fibre cement, plasterboard and structural sheeting.

Marine ply, timber sheeting and timber posts

Polystyrene

Coverage 2 litres/m² for waterproofing applications

Dry Times Full cure: 5 day

Colour Black

Packaging 15 litre, 200 litre, 1,000 IBC
Details
Gripset RD – Weatherproof Membrane
Highly flexible acrylic waterproof membrane designed for use over exterior substrates for long term protection against UV degradation and harsh climatic conditions.

Waterproof & weatherproof

Flexible and elastomeric

Resistant to fungi and algae growth

Uses

Metal and concrete roofs

Parapet walls

Gutters

Vertical walls and facades

Substrates

Concrete, render and masonry

Fibre cement, plaster board and structural sheeting

Asbestos

Glavanised iron and zincalume

Coverage Flat/horizontal surfaces: 1.5 litres/m² Pitched/vertical surfaces: 1litre/m²

Dry Times Weatherproof vertical: 24 hours Weatherproof Horizontal: 72 hours

Colour White

Packaging 15 litre
Details
Gripset 51 – Solvent Free Bitumen Rubber Membrane
Bitumen rubber liquid membrane suitable for underground and external areas. Displaying excellent sealing and adhesion properties for waterproofing applications, Gripset 51 is also suitable as an anti rot and rust preventative coating over timber and metal surfaces.

Solvent free, non flammable and non toxic

Outstanding adhesion and sealing properties

Highly flexible

Uses

Retaining walls and underground surfaces

Planter boxes and garden beds

Gutter and roofing repairs

Substrates

Concrete, render and masonry

Fibre cement, plasterboard and structural sheeting

Galvanised iron and zincalume (not raw steel)

Polystyrene

Coverage 2 x coats at a total minimum coverage of 1.5 litres/m²

Dry Times Re-coat: 2-4 hours Backfill: 5 days curing Immerion: 21 days

Colour Black

Packaging 5 and 15 litre pails
Details
Gripset P39 – Polyurethane Hybrid Membrane
Gripset P39 is a versatile, high performance membrane based on advanced hybrid polyurethane technology. Suitable as an exposed membrane in external applications, or for use under tiles and other finishes, P39 offers superior sealing and durable properties against continuously wet conditions and harsh climatic conditions.

Highly flexible and elastomeric

Resistant to fungi and algae

Solvent free, non-hazardous

Suitable for exposed and under tile application

Uses

Roofs as an exposed membrane finish

Parapets

External surfaces exposed to constant weather

Roofs to be covered over with screeds and toppings

Internal wet areas, bathrooms, laundries and tiled areas

Balconies, decks, podiums, terrace floors

General tiled areas to prevent moisture ingress

Substrates

Concrete, render and masonry

Fibre cement sheeting, plasterboard and structural sheeting

Wet area timber sheeting and external grade plywood

Aerated concrete panels and blocks

Coverage 2 x coats applied at a total minimum coverage of 1.5litres per m2

Dry Times
Weatherproof 24 hours

Colour Grey

Packaging 15 litre pails
Details
Gripset Xpress Multi Pro Membrane – Water Based Elastomeric Membrane
Xpress Multi Pro Membrane represents a new level of next generation waterproofing technology for water-based membrane systems, providing fast cure properties that are unique in low temperature and high relative humidity environments. Designed for both under the tile and exposed applications subject to UV exposure, Xpress Multi Pro enables installation and operation under full service conditions in a fraction of the time of any other water based liquid membrane system. Xpress Multi Pro overcomes traditional shortfalls of current water borne systems including prolonged drying times, susceptibility to re-emulsification after early water ponding and washout after rain.

Resistant to rain wash out in less than 1 hour

Handles ponding water in 3 hours

Suitable for under tile or exposed applications

Class III Membrane to AS4858 and AS4654

Uses

Roofs as an exposed membrane finish

Roofs to be covered over with screeds and toppings

Internal wet areas, bathrooms, laundries and tiled areas

Balconies, decks, podiums, terrace floors

Box gutters

Parapets

External surfaces exposed to constant weather

Substrates

Concrete, render, cement screed and masonry

Fibre cement sheeting, plasterboard and structural sheeting

Wet area timber sheeting and external grade plywood

Aerated concrete panels and blocks

Dry Times Tack free: 45 minutes Recoat: 1 hour
Details
Gripset C-Stone – Moisture Sensitive Stone Adhesive
Gripset C-Stone is fast set high strength adhesive designed for use with moisture sensitive stone. With rapid set time along with non slip and non slump properties, C-Stone is a cost effective, commercial grade adhesive for moisture sensitive stone applications.

Meets C2S2TE classifications

Fast setting, trafficable after 4 hours

Commercial grade

Uses

For bonding moisture sensitive stone

Internal and external applications

General tiling applications requiring fast turnaround time

Substrates

Concrete

Masonry renders

Screeds

Plasterboard linings

Fibre cement surfaces

Gripset membrane systems

Dry Times Open time: 20 minutes Adjustment time: 30 minutes Grouting time: 4 hours Ready for use: 4-6 hours Pot life: 40 minutes

Coverage 12m² on walls using a 6mm notch trowel 7m² on floors using a 10mm notch trowel

Packaging 20kg Bags
Details
Gripset C-Mastic – High Strength Polymer Modified Tile Adhesive
Gripset C-Mastic is a high strength polymer modified tile adhesive designed for commercial applications.White and non-slump, C-Mastic has been developed with enhanced fibre technology to provide superior shear strength for large format tiles. Suitable for interior and exterior use on both wall and floor tiling applications.

Flexible

Non-slump

High Strength

C2TES1 classification

Accommodates shrinkage movement associated with early age concrete, renders and screeds

Extended Open Time

Uses

Direct tiling over Gripset under tile waterproof membranes and systems

Wall and floor tiling

Internal and external areas

Large format tiles

Over early age concrete, screeds and renders

Substrates

Concrete

Masonry renders

Screeds

Plasterboard linings

Fibre cement surfaces

Gripset membrane systems

Dry Times Open time: 35 minutes Adjustment time: 60 minutes Grouting time: 8 hours Ready for use: 24 hours Pot life: 2 hours

Coverage Coverage of Gripset C-Mastic will be:

12m² on walls using a 6mm notch trowel

8m² on floors using a 10mm notch trowel

Packaging

20kg Bags
Details
Gripset C-Lite – High Performance Ceramic Tile Adhesive
Gripset C-Lite is a high performance tile adhesive designed for commercial applications where a wide range of large format tile and stone may be used. White, non-slump and developed with enhanced polymer light weight technology, Gripset C - Lite provides extended open time and meets C2S1TE classifications.

Light weight technology providing outstanding coverage

Accommodates shrinkage movement associated with early age concrete, screeds and renders

Commercial grade

C2TES1 classification

Uses

Direct tiling over Gripset under tile waterproof membranes and systems

Wall and floor tiling

Internal and external areas

Immersed applications when used with Gripset 11Y

For bonding all types of tiles including porcelain, vitrified, mosaic, marble, natural stone

Over early age concrete, screeds and renders

Substrates

Concrete

Masonry renders

Screeds

Plasterboard linings

Fibre cement surfaces

Gripset membrane systems

Dry Times Open time: 35 minutes Adjustment time: 60 minutes Grouting time: 8 hours Ready for use: 24 hours Pot life: 2 hours

Coverage Coverage of Gripset C-Lite will be: 12m²on walls using a 6mm notch trowel 7m²on floors using a 10mm notch trowel

Packaging 15kg Bags
Details

Gripset C-Grout Smooth – Polymer Modified Ceramic Tile Grout

Gripset C-Grout Smooth is a polymer modified cement-based grout designed for all types of tiles including vitrified, porcelain, mosaic, glass tiles and stone. Containing anti mould, non shrink and good stain resistant properties, Gripset C-Grout is ideal for all internal, external and immersed applications.

Anti mould properties
Non-shrink
Smooth finish profile for 1mm-6mm joints
Wall and floor tiling
Available in a range of colours

Uses

Grouting for wall and floor surfaces
Internal and external applications
Immersed areas including pools, water features, ponds, fountains etc. when used with Gripset 11Y. Refer to TDS for details

Substrates

Concrete
Mosaic and glass mosaic
Vitrified
Porcelain
Natural stone
Marble

Dry Times Pot Life: 1 hour In warmer or external conditions this may be reduced to 45-50 minutes. When using externally ensure grout is covered from the sun to avoid reduced pot life.

Coverage C-Grout Smooth Grout coverage-m²per 10 kg bag

Tile dimensions	1mm	3mm	6mm
25 x 25 x 6mm	10m²	5m²	2.3m²
50 x 50 x 6mm	20m²	10m²	5m²
100 x 100 x 6mm	38m²	20m²	8m²
150 x 150 x 6mm	64m²	32m²	16m²
200 x 200 x 10mm	40m²	20m²	18.6m²
300 x 300 x 10mm	70m²	34m²	23m²
300 x 600 x 10mm	96m²	48m²	30m²

Packaging 10Kg Bags

Details

Gripset C-Bond – Industrial Grade Adhesive
Gripset C-Bond is a high strength polymer modified tile adhesive designed for commercial and industrial applications where a wide range of large format tile and stone may be used. White, non-slump and developed with enhanced polymer technology to provide superior bond strength for large format tiles in wall and floor applications. C-Bond provides economical coverage and excellent non-slump and compressive strength properties for large and heavy tiles. Suitable for interior and exterior use on both wall and floor tiling applications, including fully submerged. Gripset C-Bond provides extended open time and meets C2S1TE classifications. Also suitable for use over a range of Gripset waterproofing membranes systems

Industrial grade adhesive

Ideal for heavy traffic areas

Shock and vibration resistant

Substrates

Substrates suitable for bonding Gripset C-Bond over include:

Concrete

Masonry renders

Screeds

Plasterboard linings

Fibre cement surfaces

Gripset membrane systems

Uses

Enhanced polymer technology

Commercial and industrial grade

Suitable for fully submerged applications

Can be used on 7-day old concrete and over screeds/renders after 24 hours.

Can be used directly over Gripset waterproofing membranes

Dry Times Ready to use: 24 Hours

Coverage 10m² on walls using a 6mm notch trowel 6m² on floors using a 10mm notch trowel
Details
Gripset C-PLUG – Rapid Set Water Plug 1kg
Rapid setting, non shrink, cement based compound that forms an instant waterproof seal against active water leaks under pressure. Ideal for active water leakages through holes, cracks and similar openings in concrete and masonry surfaces.

Rapid setting and non shrinking

Instant seal against active water leaks

High strength waterproof finish

Uses

Water tanks and water retention structures

Basements, cellars, and underground car parks

Lift shafts and lift pits

Concrete pipes

Substrates

Suitable for concrete and masonry substrates

Dry Times 1-3 minutes

Colour Grey powder

Packaging 4kg and 15kg bags (in pails)
Details
Gripset C-BED – Premium Grade Screed
Premium grade, polymer enhanced cementitious compound designed for high performance screeding applications. The unique polymer formulation provides excellent water resistance and high strength properties for use in critical areas subject to continuous moisture.

Premixed and ready for use

Maintains high strength at low builds

Outstanding adhesion

Uses

Shower alcoves

Balconies and decks

Podiums

Rooftop terraces

Planter boxes and roof gardens

Screeds applied over or under membranes

Substrates

Concrete and masonry

Fibre cement sheeting and structural wet area sheeting (when used in conjunction with Gripset wet area systems

Gripset wet area membranes

Coverage 1 x 20 kg Bag of Gripset C-Bed will cover approximately 1.2m² at 10mm thickness

Dry Times Touch Dry: 4 hours Tiling over: 16 hours

Colour Grey Powder

Packaging Bag, 20 kg
Details
Gripset DM – Premium Grade Mortar
Premium grade, cementitious mortar compound designed for use in conjunction with other Gripset membranes and additives for general and specialised applications.

For use directly with Gripset membranes and additives

Superior finishes and performance

Uses

High performance renders and screeds

Repair mortars

Fillers and fillets

Additive for use with select Gripset membranes and admixtures

Colour Grey powder

Packaging Bag, 20kg
Details
Gripset 2P – 2 Part Flexible Cementitious Membrane
Highly versatile, two component latex cementitious membrane designed for a range of waterproofing applications including internal and external wet areas, immersed and subterranean areas. Developed by advanced polymer technology, Gripset 2P provides a highly durable membrane while maintaining flexible and permanent waterproofing properties.

Highly versatile

Fast curing

Tough, durable finish

Uses

Internal wet areas, bathrooms, laundries and tiled areas

Balconies, decks, podiums, terrace floors and tiled roofs

Retaining walls, planter boxes and underground areas

Water features, swimming pools

Potable water storage facilities, retention tanks and general water tank areas

Planters, retaining walls, earth shelters

Substrates

Concrete, render and masonry

Fibre cement sheeting, plasterboard and structural sheeting

Wet area timber sheeting and external grade plywood

Aerated concrete panels and blocks

Coverage 2 x coats coverage of 1.5 litres/m²

Dry Times Re-coat: 2-4 hours Tiling or toppings over: 24 hours Immersion: 21 days

Colour Liquid: white Dry – light grey

Packaging Liquid: 10 litres in 20L pail Dry Bag, 15 kg
Details
Gripset C-Level – Fast Set Leveller
Gripset C-Level is a high performance, a rapid setting cementitious self-leveling compound designed for internal use over a variety of uneven substrates. With its superior compressive strength, Gripset C-Level is compatible to be used under tile, stone, timber, carpet, vinyl and Gripset’s full range of waterproofing products. Gripset C-Level can be applied from 2mm-20mm in a single application and is durable enough to be used exposed in light traffic areas.

Commercial grade self leveler

2-20mm applications

Superior compressible strength over 50MPa

Uses

Time-saving -Fast setting and ready for direct use.

Conveniently pre-bagged – highly portable for mixing on sites in bulk mixing equipment.

Does not require additives or admixtures

Use over Underfloor heating

Provides high strength at low builds

Substrates
Substrates suitable for application of Gripset C-Level include:

Concrete

Screed

Cement Sheet

Heated Slabs

Concrete blocks

Dry Times
Based on normal ambient temperatures of 23ºC

*Temperature, humidity and porosity

Touch Dry: 2-3 hours

Tiling/toppings over: 4-6 hours will vary dry times
Coverage

1m² at 10mm thick.
Note: Coverage will vary based on surface porosity and surface condition e.g. roughness, evenness, etc.etc.
Details
Gripset C-1P – 1 Part Flexible Cementitious Membrane
High performance, one component, flexible polymer cementitious membrane designed for a range of positive and negative waterproofing applications. Based on unique polymer technology providing outstanding waterproofing and adhesion properties for long term sealing performance and durability

Unique one part formulation

Resistant to positive and negative water pressure

Suitable for underground and immersed applications

Uses

Basement walls, internal and external sides

Lift pits

Water features, swimming pools

Potable water storage facilities, retention and water tanks

Substrates

Concrete

Render, screeds and general masonry surfaces

Aerated concrete panels and blocks

Coverage 2 x coats at coverage of 1.5 litres per m²

Dry Times Recoat: 90-120 minutes Tiling or toppings over: 24 hours Backfilling: 4 days Exposure to water pressure: 7 days Immersion: 21 days

Colour Grey

Packaging 15kg
Details
Gripset GC2 – Waterproof, Anti-Fracture Sheet Membrane
Gripset GC2 is part of an innovative sheet membrane system that provides high performance waterproof and vapour proof membrane with outstanding crack resistantant de-coupling properties. Specifically designed for external wet areas, roofing and specialised remedial applications. Consisting of fibre bonded fabric on the exposed face and heavy duty fibre backing on the rear face, GC2 forms a fast and highly durable waterproof system that allows surface toppings/finishes or Gripset trafficable coatings to be applied over immediately after the membrane system has been installed. A unique feature of the GC2 system is the anti-fracture and decoupling properties to prevent stress cracks from transferring through to the finished surfaces over concrete, masonry and timber substrates. Further details are available in the Gripset GC manual for a range of specifications and fixing details for waterproofing applications where this system can be used.

Provides an immediate waterproof finish upon completion, avoids delayed drying times

Fast and reliable sealing method. Reduces labour and application time of waterproofing by >50% over sheet and liquid systems

Enables the direct application of toppings, tiles, screeds, levellers and liquid membrane same day as waterproofing application

“It's bullet a proof system and the adhesive is easy to trowel, easy to apply” - John Geramia, Trim Tech.

Uses

External wet areas, podiums, terraces, and balconies to be tiled over

External wet areas to be finished over with pedestal pavers

Roofs, suspended external floors and box gutters when used with Gripset UV stable finishes applied over

Repair system over failed roof membrane products

Roof gardens, earth shelters (* refer fixing specification)

Planters and garden beds (* refer fixing specification)

Suspended pool floors, spas, water features and fish ponds

Decoupling/anti-fracture membrane system prior to tiles on concrete and timber flooring substrates

Substrates

Concrete

Render, screeds and general masonry surfaces

Concrete blocks and clay brick

CFC, cement sheet, Hardies Scyon™, plaster board surfaces

Particleboard flooring (Structaflor etc)

Plasters and general mineral surfaces

Aerated concrete panels and blocks

Coverage GC2 Sheet: 15m x 1m wide roll = 15m²

Colour Yellow

Packaging Cardboard box consisting of 1 roll: 15mx1m
Details
GC Pro – Waterproof Bedding Adhesive
Gripset GC Pro is a unique, single-component waterproof bedding compound for use with the Gripset GC sheet membrane suite. Incorporating the latest fast-drying technology, GC Pro displays outstanding primer-less adhesion over various substrates including concrete, masonry screed and fibre cement sheeting.

Water-based, free of solvents, non-toxic and non-flammable

Waterproof Primer-less adhesion

Fast drying

Suitable for internal and external use

Can be applied over damp surfaces

Excellent workability and easy to apply

Roller or trowel applied

Substrates

Concrete

Render, screeds and general masonry surfaces

Concrete blocks and clay brick

CFC, cement sheet, Hardies Scyon™, plaster board surfaces

Particleboard flooring (Structaflor etc)

Plasters and general mineral surfaces

Aerated concrete panels and blocks

Metals

Coverage
A minimum 0.8mm wet bed of GC Pro Adhesive is to be formed for bonding the GC sheet membrane suite.

General consumption is approximately 1.2m² per litre applied with a 2.4mm V notch trowel or medium nap roller.

Adhesive coverage is dependent upon surface condition and will vary accordingly as uneven surfaces will require greater coverage to achieve the required bed thickness

1 x 15Litre pail of Gripset GC Pro Adhesive will cover approx. 18m² of area to adhere the GC sheet suite to the surface.
Colour

Blue

Packaging 15kg pail
Details
Gripset GC1 – High Performance Waterproof & Vapour Barrier Sheet
A sheet membrane that provides high performance waterproof and vapour barrier protection for numerous applications. The unique properties of the GC1 membrane system enable it to form a fast and highly durable waterproof finish enabling surface finishes such as tiles, screeds and toppings to be applied immediately after the membrane system has been installed.

Waterproof layer and vapour barrier

Uses

Internal wet areas, wet floors, showers, laundries

Sandwich sealing between existing and new slabs

Internal anti-fracture flooring system for tiles over concrete

Vapour sealing for wall and floor substrates

Sandwich sealing between existing and new concrete toppings

Substrates

Render, screeds and general masonry surfaces

Concrete blocks and clay brick

CFC, cement sheet, Hardies Scyon™, plaster board surfaces

Plasters and general mineral surfaces

Aerated concrete panels and blocks

Metals

Coverage GC1 Sheet: 30m x 1m roll = 30m² GC1 Adhesive: 1 x 20kg bag will cover 15m²

Colour Blue sheet

Packaging Cardboard carton, consisting of 1 Roll: 30m x 1m GC1 Adhesive - 20kg bags
Details
GC All Purpose – High Strength Adhesive
Gripset GC All Purpose Adhesive is a high performance, single part waterproof bedding compound used for fixing any of the GC sheet membranes. Based on silane modified polymer technology, GC All Purpose adhesive possesses outstanding adhesion and high early grab properties over a broad range of porous and non porous substrates. Designed to fix all the Gripset GC Sheet membranes for internal and external applications, providing a low viscosity, easily spreading adhesive with smooth consistent properties that can be applied to dry and damp surfaces.

Ready to use, no mixing required

Easy trowelling properties, with outstanding form/ridge holding

Rapid grab and outstanding adhesion properties

Waterproof

Suitable for porous and non porous surfaces

Able to be applied over damp and un-primed surfaces

Rain resistant

Excellent footfall and sound dampening properties

Non hazardous, very low odour for internal applications

Can be covered with Gripset trafficable coatings while wet

Substrates

Concrete

Render, screeds and general masonry surfaces

Concrete blocks and clay brick

CFC, cement sheet, plaster board surfaces

Particleboard flooring (Structaflor etc)

Plasters and general mineral surfaces

Aerated concrete panels and blocks

Coverage When used to fix the GC1 and GC4 sheet systems: 1.2m² per kg using a 2mm notch tooth trowel. When used to fix the GC2 sheet system: 0.8m² per kg using a 3mm notch tooth trowel

Colour Wet: grey Dry: brown

Packaging 16kg pails
Details
Gripset BRW HD – HDPE Reinforced Butyl Rubber Waterproofing
Gripset BRW-HD is a self-adhesive butyl rubber sheet membrane with a laminated high strength HDPE film facing designed for subterranean waterproofing and multi layered sheet membrane applications. The high tack butyl backing provides a high performance waterproof layer with unrivalled adhesion to porous and non-porous surfaces in a wide range of temperature conditions. BRW-HD membrane has outstanding resistance to vibration, movement and flexing, delivering a waterproofing system that overcomes the limitations of bitumen self tack and heat applied sheet membranes. As a non-bituminous system, termination points at ground level or above earth lines have no risk of bleeding or yellowing into wall surface finishes. The BRW-HD system along with the BRW-PF grade enables the direct adhesion of finishes over the membrane including tiles, renders, textures, paints systems and decorative finishes.

Uses

Self-adhesive application

Outstanding high bond adhesion over surfaces applied to

Excellent performance in low to high temperatures, -30⁰C to 80⁰C

Substrates

Primed or dense concrete

Primed concrete block and masonry

Galvanised iron, zincalume, copper, aluminium, and most metallics

Soft and rigid plastics, PVC, DPC films

Colour HDPE film; butyl backing black

Packaging 10mx1m roll packed in cardboard box

The BRW-HD Tape is to be used at sheet ends between rolls, to seal overlapped sections where there is no sealing strip. BRW-HD tape can be used as a general detailing tape for all BRW-HD applications. All general overlapping between sheets or with the BRW-HD Tape should be a minimum of 50mm.
Details