• Durable hard wearing and nonslip membrane designed for external floor surfaces. Suitable for permanent exposure to varying climatic conditions, UV light and foot traffic. Use LS Roof Coat in conjunction with Gripset 38 as an exposed, trafficable weatherproof membrane system for roofs, podiums and balcony areas.
    • Durable hard wearing
    • Nonslip finish
    • Excellent ponding water resistance
    Uses
    • Roof areas*
    • Walkways
    • Deck and balcony areas*
    • Exposed roof surfaces for maintenance and access areas*
    • *When used in conjunction with Gripset 38 as the base membrane layer
    Substrates
    • Concrete and masonry screeds fibre cement, compressed fibre cement and cement sheeting products
    • Exterior grade plywood
    • Hebel panels
    Coverage 2 x coats at total minimum 1 litre/m2
    Dry Times Weatherproof: 72 hours
    Colour Grey
    Packaging 15 litre pails
  • Unique bitumen compound designed for applications where high build finishes are required. Application is by spatula or trowel achieving film builds in excess of 10mm in a singular application. Under compression the waterproofing properties and water vapour transmission properties are further enhanced offering an ideal durable membrane for subterranean applications
    • Solvent free, non flammable and non toxic
    • Up to 10mm build in one application
    • High impact and abrasion resistance
    Uses
    • Waterproofing underground substrates, retaining walls, garden beds
    • Waterproof patching/filler
    • Waterproofing large construction joints (non expansion joints), e.g. abutments between concrete panels and precast
    Substrates
    • Concrete, render and masonry.
    • Fibre cement, plasterboard and structural sheeting.
    • Marine ply, timber sheeting and timber posts
    • Polystyrene
    Coverage 2 litres/m2 for waterproofing applications
    Dry Times Full cure: 5 day
    Colour Black
    Packaging 15 litre, 200 litre, 1,000 IBC
  • Highly flexible acrylic waterproof membrane designed for use over exterior substrates for long term protection against UV degradation and harsh climatic conditions.
    • Waterproof & weatherproof
    • Flexible and elastomeric
    • Resistant to fungi and algae growth
    Uses
    • Metal and concrete roofs
    • Parapet walls
    • Gutters
    • Vertical walls and facades
    Substrates
    • Concrete, render and masonry
    • Fibre cement, plaster board and structural sheeting
    • Asbestos
    • Glavanised iron and zincalume
    Coverage Flat/horizontal surfaces: 1.5 litres/m2 Pitched/vertical surfaces: 1litre/m2
    Dry Times Weatherproof vertical: 24 hours Weatherproof Horizontal: 72 hours
    Colour White
    Packaging 15 litre
  • Bitumen rubber liquid membrane suitable for underground and external areas. Displaying excellent sealing and adhesion properties for waterproofing applications, Gripset 51 is also suitable as an anti rot and rust preventative coating over timber and metal surfaces.
    • Solvent free, non flammable and non toxic
    • Outstanding adhesion and sealing properties
    • Highly flexible
    Uses
    • Retaining walls and underground surfaces
    • Planter boxes and garden beds
    • Gutter and roofing repairs
    Substrates
    • Concrete, render and masonry
    • Fibre cement, plasterboard and structural sheeting
    • Galvanised iron and zincalume (not raw steel)
    • Polystyrene
    Coverage 2 x coats at a total minimum coverage of 1.5 litres/m2
    Dry Times Re-coat: 2-4 hours Backfill: 5 days curing Immerion: 21 days
    Colour Black
    Packaging 5 and 15 litre pails
  • Gripset P39 is a versatile, high performance membrane based on advanced hybrid polyurethane technology. Suitable as an exposed membrane in external applications, or for use under tiles and other finishes, P39 offers superior sealing and durable properties against continuously wet conditions and harsh climatic conditions.
    • Highly flexible and elastomeric
    • Resistant to fungi and algae
    • Solvent free, non-hazardous
    • Suitable for exposed and under tile application
    Uses
    • Roofs as an exposed membrane finish
    • Parapets
    • External surfaces exposed to constant weather
    • Roofs to be covered over with screeds and toppings
    • Internal wet areas, bathrooms, laundries and tiled areas
    • Balconies, decks, podiums, terrace floors
    • General tiled areas to prevent moisture ingress
    Substrates
    • Concrete, render and masonry
    • Fibre cement sheeting, plasterboard and structural sheeting
    • Wet area timber sheeting and external grade plywood
    • Aerated concrete panels and blocks
    Coverage 2 x coats applied at a total minimum coverage of 1.5litres per m2
    Dry Times
    Weatherproof 24 hours
    Colour Grey
    Packaging 15 litre pails
  • Xpress Multi Pro Membrane represents a new level of next generation waterproofing technology for water-based membrane systems, providing fast cure properties that are unique in low temperature and high relative humidity environments. Designed for both under the tile and exposed applications subject to UV exposure, Xpress Multi Pro enables installation and operation under full service conditions in a fraction of the time of any other water based liquid membrane system. Xpress Multi Pro overcomes traditional shortfalls of current water borne systems including prolonged drying times, susceptibility to re-emulsification after early water ponding and washout after rain.
    • Resistant to rain wash out in less than 1 hour
    • Handles ponding water in 3 hours
    • Suitable for under tile or exposed applications
    • Class III Membrane to AS4858 and AS4654
    Uses
    • Roofs as an exposed membrane finish
    • Roofs to be covered over with screeds and toppings
    • Internal wet areas, bathrooms, laundries and tiled areas
    • Balconies, decks, podiums, terrace floors
    • Box gutters
    • Parapets
    • External surfaces exposed to constant weather
    Substrates
    • Concrete, render, cement screed and masonry
    • Fibre cement sheeting, plasterboard and structural sheeting
    • Wet area timber sheeting and external grade plywood
    • Aerated concrete panels and blocks
    Dry Times Tack free: 45 minutes Recoat: 1 hour
  • Next generation fast curing, fibre reinforced SBR latex membrane designed for waterproofing internal and external wet areas under tiles, toppings and overlay finishes. Utilising the latest in fast cure technology, Gripset 38 FC provides rapid re-coat and tile over time, making it the ideal choice for domestic and commercial projects with time constraints that require fast turnaround times.
    • Fast cure technology - tile over in 4 hours
    • Resistant to permanently wet conditions without re-emulsification
    • Tough durable finish
    Uses
    • Internal wet areas, bathrooms, laundries and tiled areas
    • Balconies, decks, podiums, terrace floors and tiled roofs
    • Retaining walls, planter boxes and underground areas
    Substrates
    • Concrete, render and masonry
    • Fibre cement sheeting, plasterboard and structural sheeting
    • Wet area timber sheeting and external grade plywood
    Coverage 2 x coats at a total minimum coverage of 1.5 litres/m2
    Dry Times Recoat: 1 hour Tiling/toppings over: 4 hours
    Colour Blue
    Packaging 5 and 15 litre pails

Title

Go to Top