MB Waterproofing Supplies - Page 3 of 4 - MB Napier

Gripset Xpress Multi Pro Membrane – Water Based Elastomeric Membrane
Xpress Multi Pro Membrane represents a new level of next generation waterproofing technology for water-based membrane systems, providing fast cure properties that are unique in low temperature and high relative humidity environments. Designed for both under the tile and exposed applications subject to UV exposure, Xpress Multi Pro enables installation and operation under full service conditions in a fraction of the time of any other water based liquid membrane system. Xpress Multi Pro overcomes traditional shortfalls of current water borne systems including prolonged drying times, susceptibility to re-emulsification after early water ponding and washout after rain.

Resistant to rain wash out in less than 1 hour

Handles ponding water in 3 hours

Suitable for under tile or exposed applications

Class III Membrane to AS4858 and AS4654

Uses

Roofs as an exposed membrane finish

Roofs to be covered over with screeds and toppings

Internal wet areas, bathrooms, laundries and tiled areas

Balconies, decks, podiums, terrace floors

Box gutters

Parapets

External surfaces exposed to constant weather

Substrates

Concrete, render, cement screed and masonry

Fibre cement sheeting, plasterboard and structural sheeting

Wet area timber sheeting and external grade plywood

Aerated concrete panels and blocks

Dry Times Tack free: 45 minutes Recoat: 1 hour
Details
Gripset 38FC – SBR Fast Cure Membrane
Next generation fast curing, fibre reinforced SBR latex membrane designed for waterproofing internal and external wet areas under tiles, toppings and overlay finishes. Utilising the latest in fast cure technology, Gripset 38 FC provides rapid re-coat and tile over time, making it the ideal choice for domestic and commercial projects with time constraints that require fast turnaround times.

Fast cure technology - tile over in 4 hours

Resistant to permanently wet conditions without re-emulsification

Tough durable finish

Uses

Internal wet areas, bathrooms, laundries and tiled areas

Balconies, decks, podiums, terrace floors and tiled roofs

Retaining walls, planter boxes and underground areas

Substrates

Concrete, render and masonry

Fibre cement sheeting, plasterboard and structural sheeting

Wet area timber sheeting and external grade plywood

Coverage 2 x coats at a total minimum coverage of 1.5 litres/m²

Dry Times Recoat: 1 hour Tiling/toppings over: 4 hours

Colour Blue

Packaging 5 and 15 litre pails
Details
Gripset SB – MS Polymer Sealant
Innovative, one component adhesive/sealant based on technology that is free of isocyanates, solvents and halogens. Provides superior adhesion, flexibility and versatility in a wide range of applications.

Permanently flexible and elastic

Outstanding adhesion and bonding properties

Fast-curing

Uses

Powerful and versatile adhesive/sealant for general and specialised applications

General fabrication and bonding of various materials

Elastoproof XP expansion joint applciations - bonding edges to substrate

Substrates

Metals including brass, copper, stainless steel and galvanised iron

Timber, concrete and cement based materials

Glass and GRP (glass reinforced products)

Coverage The following bead diameters are a guide for expected length coverage per 600ml sausage 3mm bead – 80 metres/600ml sausage 5mm bead – 29 metres/600ml sausage 6mm bead – 20 metres/600ml sausage

Dry/Cure Times Tack Free: 30 mins Full Cure: 2.5mm/24hrs

Colour White

Packaging 600ml (White) Sausage; Carton quantities – 20 sausages/carton
Details
Elastoproof Corners – Prefabricted Corner Sections 10 pack
For use in conjunction with the Elastoproof B50 Joint Band for effective detailing at critical 90° and 270º corner intersections. Prefabricated corners ensure a seamless and elastic seal, overcoming many difficulties when detailing membranes at volatile areas.

Protection for critical corner intersections

Ensures effective detailing at critical 90° and 270° corner intersections

Overcomes difficulties when detailing at volatile areas

Uses

Internal Corners – designed for 90° corners to form a seamless seal over corner intersections

External Corners – designed for 270° corner sections to form a seamless seal between wall intersections. Ideal for pillars columns and outside returns

Colour Grey

Packaging Internal 90º corners Size: 200mm x 200mm with 120mm wall/floor returns External 270º corners Size: 200mm x 200mm with 120mm wall/floor returns
Details
Elastoproof RF – Reinforcing Fabric
Premier standard detailing fabric displaying outstanding workability and inherent strength. Suitable for a range of waterproofing applications where liquid membrane detailing or enhanced tensile strength is required. Provides excellent rupture resistance for liquid membranes over cracks, sheet laps, joints and pinholes.

Outstanding workability and inherent strength

Tough and durable

Rot-resistant

Uses

Enhancing tensile strength of liquid membranes

Reinforcement of liquid membranes over cracks, joints and sheet laps

Colour White

Packaging 100m x 1m wide 100m x 200mm wide 100m x 150mm wide 100m x 100mm wide
Details
BRW PF Tape – Multipurpose Self-adhesive Tape 10m x 80ml
Multi-purpose, self adhesive band designed for detailing and flashing a variety of surfaces.

Excellent adhesion and flexible properties

Protection against moisture ingress, vibration and flexing

Creates an instant waterproof seal that can be finished over with Gripset membranes, coatings, mortars, adhesives and renders

Uses

Sealing roof sheet laps

Sealing holes and pitted areas in metal surfaces

Reinforcement bond breaker

Colour Grey

Packaging 150mm x 10m x 0.8mm 80mm x 5m x 0.8mm
Details
Elastoproof Base Collars – Elastic Seal for Pipes and Penetrations
Ensures effective detailing and enhanced sealing around penetrations such as pipes, drainage outlets, cabling and any substrate fixtures by protecting against movement, vibration and cracking.

Permanent elastic collar seal for pipes, drainage, cabling, outlets and penetrations

Protects against movement, vibration and cracking

Permanent tight seal against water ingress

Uses

Internal wet areas

Balconies, podiums and roofs

Planter boxes, ponds, tanks and pools

Colour Grey

Packaging - Small Collars Size:120mm x 120mm Suitable for pipes/penetrations up to 50mm

Packaging - Medium Collars Size: 250mm x 250mm Suitable for pipes/penetrations up110mm

Packaging - Large Collars Size: 300mm x 300mm Suitable for pipes/penetrations up150mm
Details
Elastoproof B50 – Bond Breaker Joint Band
Innovative detailing system designed for waterproofing and sealing all types of joints, junctions and general areas subject to movement. Acting as the required system "bond breaker", the B50 Joint Band will accommodate movement in longitudinal, lateral and transverse directions enabling high elongation, rupture resistance and up to 100% elastic recovery.

High performance bond breaker

Long term protection at critical movement zones

Constructed of a high grade rubber compound that is reputure, chemical and water resistant

Uses

Wall/floor junctions

Substrate abutments

Control joints, movement and expansion joints

Colour Grey

Packaging 50m Roll 10m Roll
Details
BRW PF Square – Multipurpose Self-adhesive Sealing Square
The Elastoproof Butyl Waterproofing Squares are a multi-purpose self adhesive sealing square designed for detailing a variety of surfaces. Outstanding adhesion properties of the butyl rubber backing, the Elastoproof Butyl Square is ideal for sealing internal and external joint intersections and penetrations that require protection against moisture ingress, vibration and flexing.

Peel and stick application

Primer-less application (on dust free and stable surfaces)

Excellent adhesive properties over a variety of surfaces

Easy workability and deformability over substrates

Uses

Sealing puddle flanges and penetrations

Sealing joint intersections

Detailing over plumbing pipes, pvc, flashings etc.

Guttering & roofing

Reinforcement bond breaker

Patching pin holes and pitted areas on metal surfaces

General maintenance on surfaces to be covered over with surface finishes

Substrates

Primed or dense concrete

Galvanised iron, zincalume, copper, aluminium, colorbond and most metals

Timber

Structural sheeting

Glazed surfaces

Gypsum boards and brickwork

Marble, granite and ceramics

Plastics and polycarbonate

Colour Grey

Packaging 250mmx250mm Pack 10
Details
Gripset 11Y – Latex Waterproof Additive
High performance latex additive specifically formulated to enhance the performance and durability of cement-based compounds. Improves adhesion strength. Enhances water resistance, gas permeability and waterproof properties. Increases flexural strength, durability and abrasion resistance

Uses

Primer & sealing slurries

Waterproof renders, screeds and toppings

Repair mortars

Substrates

Concrete, masonry, renders and screeds

Cement sheeting, plaster board and general wet area linings

Asphalt and bitumen surfaces

Refer to datasheet for general and specialized applications

Colour White liquid

Packaging 5 litre and 15 litre pails; 200 litre drums, 1000 litre IBC
Details
Gripset Xpress SP – Rapid Set Primer
Gripset Xpress SP is a solvent free primer specifically developed with adhesion enhancing properties for non-porous, dense and smooth substrates. It is designed for use on both wall and floor surfaces, achieving high adhesion without the need for etching or using solvents. Ideally suited for the application of Gripset self-adhesive sheet and liquid membrane systems to enable the bond to difficult substrates. Also suitable for porous surfaces.

Uses

Solvent free alternative to dangerous solvent based primers

Super adhesion properties

Suitable for wall & floor surfaces

Substrates

Metals including: galvanised iron, zincalume, aluminium, stainless steel, copper, brass treated steel, colorbond sheeting

Precast and tilt up concrete, glass reinforced concrete

Hardwood and dense timber surfaces

Existing ceramic tiles, vitrified tiles and natural stone

Colour Wet/Dry – off white, not opaque

Dry Times 30 mins @ 23^oC & 50% RH

Packaging 1litre and 10 litre pails
Details
Gripset Xpress Primer H2O Plus – 1 component vapour barrier primer
Gripset Xpress Primer H20 Plus is a unique 1 component vapour barrier primer designed for use on concrete, screeds and mineral surfaces. Xpress Primer H20 Plus forms a vapour barrier to prevent blistering and delamination of membranes associated with residual dampness and surface moisture, with its outstanding penetrating and adhesion properties. Once dried Xpress Primer H20 Plus will enhance the adhesion of overlaid coatings and finishes. Fast drying properties, this unique vapour barrier forms a unique colour-changing effect while drying. It is applied as a milky white liquid and creates a light green tinge during the drying phase before becoming clear in its fully dry state when it is ready to be overcoated. Unlike traditional vapour barrier coatings, once cured the Xpress Primer H20 Plus will not change the surface properties of concrete and mineral surfaces, ensuring membranes and adhesives will bond as designed.

Uses

Fully compatible with Gripset membranes, tile adhesives, water based vinyl and flooring adhesives, renders, mortars and acrylic paints and texture coatings

Economical surface coverage of up to 1 litre/8m²

Can be used as an exposed protective sealer over concrete against carbonation and general degradation

Suitable for internal and external applications

Substrates

Substrates suitable for applying Vapour Stop over include:

Concrete, masonry surfaces, renders, screeds.

Concrete blocks and aerated concrete

Cement sheeting, plaster board and general wet area linings

Absorbent surfaces

Coverage 1itre per 6-8m²

Dry Times 1 hour

Colour When Applied: Milky whiteCuring: Light green tingeDries: Clear

Packaging 10 litre pails
Details

Title