• Xpress Multi Pro Membrane represents a new level of next generation waterproofing technology for water-based membrane systems, providing fast cure properties that are unique in low temperature and high relative humidity environments. Designed for both under the tile and exposed applications subject to UV exposure, Xpress Multi Pro enables installation and operation under full service conditions in a fraction of the time of any other water based liquid membrane system. Xpress Multi Pro overcomes traditional shortfalls of current water borne systems including prolonged drying times, susceptibility to re-emulsification after early water ponding and washout after rain.
    • Resistant to rain wash out in less than 1 hour
    • Handles ponding water in 3 hours
    • Suitable for under tile or exposed applications
    • Class III Membrane to AS4858 and AS4654
    Uses
    • Roofs as an exposed membrane finish
    • Roofs to be covered over with screeds and toppings
    • Internal wet areas, bathrooms, laundries and tiled areas
    • Balconies, decks, podiums, terrace floors
    • Box gutters
    • Parapets
    • External surfaces exposed to constant weather
    Substrates
    • Concrete, render, cement screed and masonry
    • Fibre cement sheeting, plasterboard and structural sheeting
    • Wet area timber sheeting and external grade plywood
    • Aerated concrete panels and blocks
    Dry Times Tack free: 45 minutes Recoat: 1 hour
  • Next generation fast curing, fibre reinforced SBR latex membrane designed for waterproofing internal and external wet areas under tiles, toppings and overlay finishes. Utilising the latest in fast cure technology, Gripset 38 FC provides rapid re-coat and tile over time, making it the ideal choice for domestic and commercial projects with time constraints that require fast turnaround times.
    • Fast cure technology - tile over in 4 hours
    • Resistant to permanently wet conditions without re-emulsification
    • Tough durable finish
    Uses
    • Internal wet areas, bathrooms, laundries and tiled areas
    • Balconies, decks, podiums, terrace floors and tiled roofs
    • Retaining walls, planter boxes and underground areas
    Substrates
    • Concrete, render and masonry
    • Fibre cement sheeting, plasterboard and structural sheeting
    • Wet area timber sheeting and external grade plywood
    Coverage 2 x coats at a total minimum coverage of 1.5 litres/m2
    Dry Times Recoat: 1 hour Tiling/toppings over: 4 hours
    Colour Blue
    Packaging 5 and 15 litre pails
  • Innovative, one component adhesive/sealant based on technology that is free of isocyanates, solvents and halogens. Provides superior adhesion, flexibility and versatility in a wide range of applications.
    • Permanently flexible and elastic
    • Outstanding adhesion and bonding properties
    • Fast-curing
    Uses
    • Powerful and versatile adhesive/sealant for general and specialised applications
    • General fabrication and bonding of various materials
    • Elastoproof XP expansion joint applciations - bonding edges to substrate
    Substrates
    • Metals including brass, copper, stainless steel and galvanised iron
    • Timber, concrete and cement based materials
    • Glass and GRP (glass reinforced products)
    Coverage The following bead diameters are a guide for expected length coverage per 600ml sausage 3mm bead – 80 metres/600ml sausage 5mm bead – 29 metres/600ml sausage 6mm bead – 20 metres/600ml sausage
    Dry/Cure Times Tack Free: 30 mins Full Cure: 2.5mm/24hrs
    Colour White
    Packaging 600ml (White) Sausage; Carton quantities – 20 sausages/carton
  • For use in conjunction with the Elastoproof B50 Joint Band for effective detailing at critical 90° and 270º corner intersections. Prefabricated corners ensure a seamless and elastic seal, overcoming many difficulties when detailing membranes at volatile areas.
    • Protection for critical corner intersections
    • Ensures effective detailing at critical 90° and 270° corner intersections
    • Overcomes difficulties when detailing at volatile areas
    Uses
    • Internal Corners – designed for 90° corners to form a seamless seal over corner intersections
    • External Corners – designed for 270° corner sections to form a seamless seal between wall intersections. Ideal for pillars columns and outside returns
    Colour Grey
    Packaging Internal 90º corners Size: 200mm x 200mm with 120mm wall/floor returns External 270º corners Size: 200mm x 200mm with 120mm wall/floor returns
  • Premier standard detailing fabric displaying outstanding workability and inherent strength. Suitable for a range of waterproofing applications where liquid membrane detailing or enhanced tensile strength is required. Provides excellent rupture resistance for liquid membranes over cracks, sheet laps, joints and pinholes.
    • Outstanding workability and inherent strength
    • Tough and durable
    • Rot-resistant
    Uses
    • Enhancing tensile strength of liquid membranes
    • Reinforcement of liquid membranes over cracks, joints and sheet laps
    Colour White
    Packaging 100m x 1m wide 100m x 200mm wide 100m x 150mm wide 100m x 100mm wide
  • Multi-purpose, self adhesive band designed for detailing and flashing a variety of surfaces.
    • Excellent adhesion and flexible properties
    • Protection against moisture ingress, vibration and flexing
    • Creates an instant waterproof seal that can be finished over with Gripset membranes, coatings, mortars, adhesives and renders
    Uses
    • Sealing roof sheet laps
    • Sealing holes and pitted areas in metal surfaces
    • Reinforcement bond breaker
    Colour Grey
    Packaging 150mm x 10m x 0.8mm 80mm x 5m x 0.8mm
  • Ensures effective detailing and enhanced sealing around penetrations such as pipes, drainage outlets, cabling and any substrate fixtures by protecting against movement, vibration and cracking.
    • Permanent elastic collar seal for pipes, drainage, cabling, outlets and penetrations
    • Protects against movement, vibration and cracking
    • Permanent tight seal against water ingress
    Uses
    • Internal wet areas
    • Balconies, podiums and roofs
    • Planter boxes, ponds, tanks and pools
    Colour Grey
    Packaging - Small Collars Size:120mm x 120mm Suitable for pipes/penetrations up to 50mm
    Packaging - Medium Collars Size: 250mm x 250mm Suitable for pipes/penetrations up110mm
    Packaging - Large Collars Size: 300mm x 300mm Suitable for pipes/penetrations up150mm
  • Innovative detailing system designed for waterproofing and sealing all types of joints, junctions and general areas subject to movement. Acting as the required system "bond breaker", the B50 Joint Band will accommodate movement in longitudinal, lateral and transverse directions enabling high elongation, rupture resistance and up to 100% elastic recovery.
    • High performance bond breaker
    • Long term protection at critical movement zones
    • Constructed of a high grade rubber compound that is reputure, chemical and water resistant
    Uses
    • Wall/floor junctions
    • Substrate abutments
    • Control joints, movement and expansion joints
    Colour Grey
    Packaging 50m Roll 10m Roll
  • The Elastoproof Butyl Waterproofing Squares are a multi-purpose self adhesive sealing square designed for detailing a variety of surfaces. Outstanding adhesion properties of the butyl rubber backing, the Elastoproof Butyl Square is ideal for sealing internal and external joint intersections and penetrations that require protection against moisture ingress, vibration and flexing.
    • Peel and stick application
    • Primer-less application (on dust free and stable surfaces)
    • Excellent adhesive properties over a variety of surfaces
    • Easy workability and deformability over substrates
    Uses
    • Sealing puddle flanges and penetrations
    • Sealing joint intersections
    • Detailing over plumbing pipes, pvc, flashings etc.
    • Guttering & roofing
    • Reinforcement bond breaker
    • Patching pin holes and pitted areas on metal surfaces
    • General maintenance on surfaces to be covered over with surface finishes
    Substrates
    • Primed or dense concrete
    • Galvanised iron, zincalume, copper, aluminium, colorbond and most metals
    • Timber
    • Structural sheeting
    • Glazed surfaces
    • Gypsum boards and brickwork
    • Marble, granite and ceramics
    • Plastics and polycarbonate
    Colour Grey
    Packaging 250mmx250mm Pack 10
  • High performance latex additive specifically formulated to enhance the performance and durability of cement-based compounds. Improves adhesion strength. Enhances water resistance, gas permeability and waterproof properties. Increases flexural strength, durability and abrasion resistance
    Uses
    • Primer & sealing slurries
    • Waterproof renders, screeds and toppings
    • Repair mortars
    Substrates
    • Concrete, masonry, renders and screeds
    • Cement sheeting, plaster board and general wet area linings
    • Asphalt and bitumen surfaces
    Refer to datasheet for general and specialized applications
    Colour White liquid
    Packaging 5 litre and 15 litre pails; 200 litre drums, 1000 litre IBC
  • Gripset Xpress SP is a solvent free primer specifically developed with adhesion enhancing properties for non-porous, dense and smooth substrates. It is designed for use on both wall and floor surfaces, achieving high adhesion without the need for etching or using solvents. Ideally suited for the application of Gripset self-adhesive sheet and liquid membrane systems to enable the bond to difficult substrates. Also suitable for porous surfaces.
    Uses
    1. Solvent free alternative to dangerous solvent based primers
    2. Super adhesion properties
    3. Suitable for wall & floor surfaces
    Substrates
    1. Metals including: galvanised iron, zincalume, aluminium, stainless steel, copper, brass treated steel, colorbond sheeting
    2. Precast and tilt up concrete, glass reinforced concrete
    3. Hardwood and dense timber surfaces
    4. Existing ceramic tiles, vitrified tiles and natural stone
    Colour Wet/Dry – off white, not opaque
    Dry Times 30 mins @ 23oC & 50% RH
    Packaging 1litre and 10 litre pails
  • Gripset Xpress Primer H20 Plus is a unique 1 component vapour barrier primer designed for use on concrete, screeds and mineral surfaces. Xpress Primer H20 Plus forms a vapour barrier to prevent blistering and delamination of membranes associated with residual dampness and surface moisture, with its outstanding penetrating and adhesion properties. Once dried Xpress Primer H20 Plus will enhance the adhesion of overlaid coatings and finishes. Fast drying properties, this unique vapour barrier forms a unique colour-changing effect while drying. It is applied as a milky white liquid and creates a light green tinge during the drying phase before becoming clear in its fully dry state when it is ready to be overcoated. Unlike traditional vapour barrier coatings, once cured the Xpress Primer H20 Plus will not change the surface properties of concrete and mineral surfaces, ensuring membranes and adhesives will bond as designed.
    Uses
    • Fully compatible with Gripset membranes, tile adhesives, water based vinyl and flooring adhesives, renders, mortars and acrylic paints and texture coatings
    • Economical surface coverage of up to 1 litre/8m2
    • Can be used as an exposed protective sealer over concrete against carbonation and general degradation
    • Suitable for internal and external applications
    Substrates
    Substrates suitable for applying Vapour Stop over include:
    • Concrete, masonry surfaces, renders, screeds.
    • Concrete blocks and aerated concrete
    • Cement sheeting, plaster board and general wet area linings
    • Absorbent surfaces
    Coverage 1itre per 6-8m2
    Dry Times 1 hour
    Colour When Applied: Milky whiteCuring: Light green tingeDries:  Clear
    Packaging 10 litre pails
  • Solvent free primer specifically developed with adhesion enhancing properties on metals, and non absorbent substrates. Suitable for both vertical and horizontal surfaces, achieving high adhesion without the need for etching or using solvents. Outstanding adhesion properties over non porous substrates. Solvent free, fast drying. Enables adhesion of Gripset membranes, coatings, adhesives and mortars over difficult substrates Substrates Metals including: galvanised iron, zincalume, aluminium, stainless steel, copper, brass treated steel, colorbond sheeting Precast and tilt up concrete, glass reinforced concrete Existing ceramic tiles, vitrified tiles and natural stone
    Coverage Up to 1 litre/12m2
    Dry Times 30-60mins
    Colour Wet/dry: Blue
    Packaging 5 litre and 15 litre pails
  • Uses
    • Moisture barrier to negative sides of underground wall structures to prevent moisture ingress (basements, lift pits, retaining walls etc)
    • Protective primer over concrete and mineral surfaces containing residual dampness, enabling the application of finished coatings without blistering or delamination
    • Protection against rising damp and efflorescence on wall and floor surfaces to enable direct fixing of vinyl, carpet, tiles, timber, levelling compounds, screeds etc over
    Substrates
    • Concrete, masonry surfaces, renders, screeds.
    • Concrete blocks and aerated concrete.
    Coverage Vapour block primer/efflorescence prevention: 1 litre/3m2 Moisture Barrier: 2 x coats at a coverage of 1 litre/3m2per coat
    Dry Times Recoat: 2-4 hours Finishes: 24 hours
    Colour Wet/Dry: Pale grey
    Packaging 10 litre Kit - Part A & Part B in 5 Litre in plastic pails 20 litre Kit – Part A 10 litre of product in 20 litre pail & Part B in 10 litre plastic pail
  • Multipurpose 2 in 1 primer and a bonding agent. As a primer, Gripset GP enhances adhesion of Gripset membranes over porous surfaces. As a bonding agent, it improves adhesion, strength and waterproof properties of cement-based compounds. Suitable for porous substrates. Fast drying with economical coverage. Outstanding adhesion.
    Uses
    • Primer for Gripset membranes
    • Tile, render and paint primer (acrylic paints only)
    Substrates
    • Concrete, masonry, renders and screeds
    • Concrete blocks and aerated concrete
    • Cement sheeting, plaster board and general wet area linings
    Coverage Membrane primer: Applied neat at 1 litre per 6m2 Paint, tile or render primer: Dilute 1 part GP to 2 parts water
    Dry Times 20-30 minutes
    Colour Wet: White Dry: Clear
    Packaging 5 litre and 15 litre pails; 200 litre drums; 1000 litre IBC

Title

Go to Top