• Gripset 38FC – SBR Fast Cure Membrane

    Next generation fast curing, fibre reinforced SBR latex membrane designed for waterproofing internal and external wet areas under tiles, toppings and overlay finishes. Utilising the latest in fast cure technology, Gripset 38 FC provides rapid re-coat and tile over time, making it the ideal choice for domestic and commercial projects with time constraints that require fast turnaround times.
    • Fast cure technology - tile over in 4 hours
    • Resistant to permanently wet conditions without re-emulsification
    • Tough durable finish
    Uses
    • Internal wet areas, bathrooms, laundries and tiled areas
    • Balconies, decks, podiums, terrace floors and tiled roofs
    • Retaining walls, planter boxes and underground areas
    Substrates
    • Concrete, render and masonry
    • Fibre cement sheeting, plasterboard and structural sheeting
    • Wet area timber sheeting and external grade plywood
    Coverage 2 x coats at a total minimum coverage of 1.5 litres/m2
    Dry Times Recoat: 1 hour Tiling/toppings over: 4 hours
    Colour Blue
    Packaging 5 and 15 litre pails
    Details

  • Tile Leveling Systems

    Box of 2000 1.5mm
    Details

  • Gripset LS – External Trafficable Coating

    Durable hard wearing and nonslip membrane designed for external floor surfaces. Suitable for permanent exposure to varying climatic conditions, UV light and foot traffic. Use LS Roof Coat in conjunction with Gripset 38 as an exposed, trafficable weatherproof membrane system for roofs, podiums and balcony areas.
    • Durable hard wearing
    • Nonslip finish
    • Excellent ponding water resistance
    Uses
    • Roof areas*
    • Walkways
    • Deck and balcony areas*
    • Exposed roof surfaces for maintenance and access areas*
    • *When used in conjunction with Gripset 38 as the base membrane layer
    Substrates
    • Concrete and masonry screeds fibre cement, compressed fibre cement and cement sheeting products
    • Exterior grade plywood
    • Hebel panels
    Coverage 2 x coats at total minimum 1 litre/m2
    Dry Times Weatherproof: 72 hours
    Colour Grey
    Packaging 15 litre pails
    Details

  • Gripset 59 – High Build Bitumen

    Unique bitumen compound designed for applications where high build finishes are required. Application is by spatula or trowel achieving film builds in excess of 10mm in a singular application. Under compression the waterproofing properties and water vapour transmission properties are further enhanced offering an ideal durable membrane for subterranean applications
    • Solvent free, non flammable and non toxic
    • Up to 10mm build in one application
    • High impact and abrasion resistance
    Uses
    • Waterproofing underground substrates, retaining walls, garden beds
    • Waterproof patching/filler
    • Waterproofing large construction joints (non expansion joints), e.g. abutments between concrete panels and precast
    Substrates
    • Concrete, render and masonry.
    • Fibre cement, plasterboard and structural sheeting.
    • Marine ply, timber sheeting and timber posts
    • Polystyrene
    Coverage 2 litres/m2 for waterproofing applications
    Dry Times Full cure: 5 day
    Colour Black
    Packaging 15 litre, 200 litre, 1,000 IBC
    Details

  • Gripset RD – Weatherproof Membrane

    Highly flexible acrylic waterproof membrane designed for use over exterior substrates for long term protection against UV degradation and harsh climatic conditions.
    • Waterproof & weatherproof
    • Flexible and elastomeric
    • Resistant to fungi and algae growth
    Uses
    • Metal and concrete roofs
    • Parapet walls
    • Gutters
    • Vertical walls and facades
    Substrates
    • Concrete, render and masonry
    • Fibre cement, plaster board and structural sheeting
    • Asbestos
    • Glavanised iron and zincalume
    Coverage Flat/horizontal surfaces: 1.5 litres/m2 Pitched/vertical surfaces: 1litre/m2
    Dry Times Weatherproof vertical: 24 hours Weatherproof Horizontal: 72 hours
    Colour White
    Packaging 15 litre
    Details

  • Gripset 51 – Solvent Free Bitumen Rubber Membrane

    Bitumen rubber liquid membrane suitable for underground and external areas. Displaying excellent sealing and adhesion properties for waterproofing applications, Gripset 51 is also suitable as an anti rot and rust preventative coating over timber and metal surfaces.
    • Solvent free, non flammable and non toxic
    • Outstanding adhesion and sealing properties
    • Highly flexible
    Uses
    • Retaining walls and underground surfaces
    • Planter boxes and garden beds
    • Gutter and roofing repairs
    Substrates
    • Concrete, render and masonry
    • Fibre cement, plasterboard and structural sheeting
    • Galvanised iron and zincalume (not raw steel)
    • Polystyrene
    Coverage 2 x coats at a total minimum coverage of 1.5 litres/m2
    Dry Times Re-coat: 2-4 hours Backfill: 5 days curing Immerion: 21 days
    Colour Black
    Packaging 5 and 15 litre pails
    Details

  • Gripset P39 – Polyurethane Hybrid Membrane

    Gripset P39 is a versatile, high performance membrane based on advanced hybrid polyurethane technology. Suitable as an exposed membrane in external applications, or for use under tiles and other finishes, P39 offers superior sealing and durable properties against continuously wet conditions and harsh climatic conditions.
    • Highly flexible and elastomeric
    • Resistant to fungi and algae
    • Solvent free, non-hazardous
    • Suitable for exposed and under tile application
    Uses
    • Roofs as an exposed membrane finish
    • Parapets
    • External surfaces exposed to constant weather
    • Roofs to be covered over with screeds and toppings
    • Internal wet areas, bathrooms, laundries and tiled areas
    • Balconies, decks, podiums, terrace floors
    • General tiled areas to prevent moisture ingress
    Substrates
    • Concrete, render and masonry
    • Fibre cement sheeting, plasterboard and structural sheeting
    • Wet area timber sheeting and external grade plywood
    • Aerated concrete panels and blocks
    Coverage 2 x coats applied at a total minimum coverage of 1.5litres per m2
    Dry Times
    Weatherproof 24 hours
    Colour Grey
    Packaging 15 litre pails
    Details

  • Gripset Xpress Multi Pro Membrane – Water Based Elastomeric Membrane

    Xpress Multi Pro Membrane represents a new level of next generation waterproofing technology for water-based membrane systems, providing fast cure properties that are unique in low temperature and high relative humidity environments. Designed for both under the tile and exposed applications subject to UV exposure, Xpress Multi Pro enables installation and operation under full service conditions in a fraction of the time of any other water based liquid membrane system. Xpress Multi Pro overcomes traditional shortfalls of current water borne systems including prolonged drying times, susceptibility to re-emulsification after early water ponding and washout after rain.
    • Resistant to rain wash out in less than 1 hour
    • Handles ponding water in 3 hours
    • Suitable for under tile or exposed applications
    • Class III Membrane to AS4858 and AS4654
    Uses
    • Roofs as an exposed membrane finish
    • Roofs to be covered over with screeds and toppings
    • Internal wet areas, bathrooms, laundries and tiled areas
    • Balconies, decks, podiums, terrace floors
    • Box gutters
    • Parapets
    • External surfaces exposed to constant weather
    Substrates
    • Concrete, render, cement screed and masonry
    • Fibre cement sheeting, plasterboard and structural sheeting
    • Wet area timber sheeting and external grade plywood
    • Aerated concrete panels and blocks
    Dry Times Tack free: 45 minutes Recoat: 1 hour
    Details

  • Gripset C-Stone – Moisture Sensitive Stone Adhesive

    Gripset C-Stone is fast set high strength adhesive designed for use with moisture sensitive stone. With rapid set time along with non slip and non slump properties, C-Stone is a cost effective, commercial grade adhesive for moisture sensitive stone applications.
    • Meets C2S2TE classifications
    • Fast setting, trafficable after 4 hours
    • Commercial grade
    Uses
    • For bonding moisture sensitive stone
    • Internal and external applications
    • General tiling applications requiring fast turnaround time
    Substrates
    • Concrete
    • Masonry renders
    • Screeds
    • Plasterboard linings
    • Fibre cement surfaces
    • Gripset membrane systems
    Dry Times Open time: 20 minutes Adjustment time: 30 minutes Grouting time: 4 hours Ready for use: 4-6 hours Pot life: 40 minutes
    Coverage 12m2 on walls using a 6mm notch trowel 7m2 on floors using a 10mm notch trowel
    Packaging 20kg Bags
    Details

  • Gripset C-Mastic – High Strength Polymer Modified Tile Adhesive

    Gripset C-Mastic is a high strength polymer modified tile adhesive designed for commercial applications.White and non-slump, C-Mastic has been developed with enhanced fibre technology to provide superior shear strength for large format tiles. Suitable for interior and exterior use on both wall and floor tiling applications.
    • Flexible
    • Non-slump
    • High Strength
    • C2TES1 classification
    • Accommodates shrinkage movement associated with early age concrete, renders and screeds
    • Extended Open Time
    Uses
    • Direct tiling over Gripset under tile waterproof membranes and systems
    • Wall and floor tiling
    • Internal and external areas
    • Large format tiles
    • Over early age concrete, screeds and renders
    Substrates
    • Concrete
    • Masonry renders
    • Screeds
    • Plasterboard linings
    • Fibre cement surfaces
    • Gripset membrane systems
    Dry Times Open time: 35 minutes Adjustment time: 60 minutes Grouting time: 8 hours Ready for use: 24 hours Pot life: 2 hours
    Coverage Coverage of Gripset C-Mastic will be:
    • 12m² on walls using a 6mm notch trowel
    • 8m² on floors using a 10mm notch trowel
    Packaging
    20kg Bags
    Details

  • Gripset C-Lite – High Performance Ceramic Tile Adhesive

    Gripset C-Lite is a high performance tile adhesive designed for commercial applications where a wide range of large format tile and stone may be used. White, non-slump and developed with enhanced polymer light weight technology, Gripset C - Lite provides extended open time and meets C2S1TE classifications.
    • Light weight technology providing outstanding coverage
    • Accommodates shrinkage movement associated with early age concrete, screeds and renders
    • Commercial grade
    • C2TES1 classification
    Uses
    • Direct tiling over Gripset under tile waterproof membranes and systems
    • Wall and floor tiling
    • Internal and external areas
    • Immersed applications when used with Gripset 11Y
    • For bonding all types of tiles including porcelain, vitrified, mosaic, marble, natural stone
    • Over early age concrete, screeds and renders
    Substrates
    • Concrete
    • Masonry renders
    • Screeds
    • Plasterboard linings
    • Fibre cement surfaces
    • Gripset membrane systems
    Dry Times Open time: 35 minutes Adjustment time: 60 minutes Grouting time: 8 hours Ready for use: 24 hours Pot life: 2 hours
    Coverage Coverage of Gripset C-Lite will be: 12m2 on walls using a 6mm notch trowel 7m2 on floors using a 10mm notch trowel
    Packaging 15kg Bags
    Details

  • Gripset C-Grout Smooth – Polymer Modified Ceramic Tile Grout

    Gripset C-Grout Smooth is a polymer modified cement-based grout designed for all types of tiles including vitrified, porcelain, mosaic, glass tiles and stone. Containing anti mould, non shrink and good stain resistant properties, Gripset C-Grout is ideal for all internal, external and immersed applications.
    • Anti mould properties
    • Non-shrink
    • Smooth finish profile for 1mm-6mm joints
    • Wall and floor tiling
    • Available in a range of colours
    Uses
    • Grouting for wall and floor surfaces
    • Internal and external applications
    • Immersed areas including pools, water features, ponds, fountains etc. when used with Gripset 11Y. Refer to TDS for details
    Substrates
    • Concrete
    • Mosaic and glass mosaic
    • Vitrified
    • Porcelain
    • Natural stone
    • Marble
    Dry Times Pot Life: 1 hour In warmer or external conditions this may be reduced to 45-50 minutes. When using externally ensure grout is covered from the sun to avoid reduced pot life.
    Coverage C-Grout Smooth Grout coverage-m2 per 10 kg bag
    Tile dimensions 1mm 3mm 6mm
    25 x 25 x 6mm 10m2 5m2 2.3m2
    50 x 50 x 6mm 20m2 10m2 5m2
    100 x 100 x 6mm 38m2 20m2 8m2
    150 x 150 x 6mm 64m2 32m2 16m2
    200 x 200 x 10mm 40m2 20m2 18.6m2
    300 x 300 x 10mm 70m2 34m2 23m2
    300 x 600 x 10mm 96m2 48m2 30m2
     
    Packaging 10Kg Bags
    Details

Title

Accreditation

Call Us Today

We are here for all of your Waterproofing Supply needs!

CALL NOW: 0410 279 664
Call Now Button
Go to Top